Pole Outdoor Post Garden Light

Pole Outdoor Post Garden Light

L 7.9″ x W 3.9″ x H 118.1″ / Black / Warm Light
$2,081.00
Sale price  $2,081.00 Regular price  $4,089.00
Skip to product information
Pole Outdoor Post Garden Light

Pole Outdoor Post Garden Light

$2,081.00
Sale price  $2,081.00 Regular price  $4,089.00
Size
ColourBlack
Kelvin range

Geometric Column Bollard Light — IP65 outdoor, 3 m post, vertical LED strips.

IP65 Waterproof  ·  Outdoor Rated

A 300 cm matte black column rises from a flush-mounted base plate, vertical LED light strips running along its full height behind clear acrylic covers — precise, architectural, and powerful in presence. The geometric square or round cross-section gives each bollard a clean, monolithic silhouette that reads well in both daytime and at night. IP65-rated and built from galvanized steel for permanent outdoor installation — suited to driveways, villa entrances, garden paths, parks, and commercial corridors. Available in single units or sets of 4 and 8.


Custom DC 12V / 24V voltage available

The standard version operates on AC 110–240V. If your project requires DC 12V or DC 24V (e.g. for solar or low-voltage landscape systems), custom voltage versions are available. Contact our support team before ordering to configure.

Sets of 4 or 8 — ordering a set means 4 or 8 individual bollards packaged together in a single freight shipment. Each bollard is a complete, independent unit.


IP65 Weatherproof

Full outdoor rating — dust-tight and protected against rain and water jets.

300 cm Column

Full 3-metre height — visible from distance, architectural presence at night.

Galvanized Steel

Structural galvanized steel sheet — corrosion-resistant, built for permanent outdoor installation.

Villa Driveways Garden Paths Park Walkways Courtyards Commercial Corridors Outdoor Lobbies Pool Surrounds

All three options share the same 300 cm column height and integrated LED strip design. Tap any image to enlarge.

Rectangular 20x10cm
Tap to enlarge
Rectangular
L 7.9″ × W 3.9″ × H 118.1″
L 20 × W 10 × H 300 cm
Slim profile — directional light strips on two long faces
Square 20x20cm
Tap to enlarge
Square
L 7.9″ × W 7.9″ × H 118.1″
L 20 × W 20 × H 300 cm
Equal four-sided column — 360° light strip presence
Round Dia 16.5cm
Tap to enlarge
Round
∅ 6.5″ × H 118.1″
Dia 16.5 × H 300 cm
Cylindrical column — softer silhouette, organic settings

Select at time of order. Integrated LED fixed at manufacture.


Warm 3000K Default

Amber warmth — suited to residential gardens, villas, and hospitality settings.


Neutral 4000K

Clean, balanced light — suited to commercial walkways and contemporary landscapes.

Need Cool White (6000K)?

Cool White (6000K) is available as a custom order. Contact our support team and we will reply within 24 hours.


Material Galvanized Steel Sheet
Cross-section options Rectangular (20×10 cm)  ·  Square (20×20 cm)  ·  Round (∅ 16.5 cm)
Column height H 300 cm (118.1″) all options
Light source Integrated LED (vertical strips)
Colour temperature Warm Light 3000K (default)  ·  4000K  ·  6000K on request
Voltage AC 110–240V standard  ·  DC 12V / 24V custom on request
IP rating IP65 — Dust-tight, rain and water-jet resistant
Environment Outdoor (lawns, driveways, garden paths, parks, corridors)
Finish Matte Black
Wiring Hardwired
Control Standard wall switch (not included)
Order options Single  ·  Set of 4  ·  Set of 8
Certification North America · EU · AU · Saudi Arabia


How is this bollard installed?

The bollard mounts on a flat surface base plate via anchor bolts. The underground electrical supply cable is routed up through the base of the column and connected to the integrated LED driver inside. A licensed electrician is required for installation. The base plate is typically fixed to a concrete pad or paved surface. Confirm exact base plate dimensions and anchor bolt spacing with the spec sheet before site preparation.

What does “set of 4 or 8” mean?

A set of 4 means 4 individual complete bollard units — packaged together in a single freight shipment. A set of 8 means 8 individual units. Each unit is complete and independent. Ordering in sets reduces per-unit freight cost compared to ordering singles separately.

Can I use this bollard with solar or a DC low-voltage system?

Yes — custom DC 12V and DC 24V versions are available. These suit solar power systems, 12V landscape lighting circuits, and other low-voltage outdoor installations. Contact our support team at info@vakkerlighting.com before ordering to specify your voltage requirement.

Is this bollard certified for North America and Europe?

Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia. The standard version operates on AC 110–240V worldwide.

You may also like