Alabaster Cylinder Pendant Light
Alabaster Cylinder Pendant Light
An alabaster cylinder pendant light: a slim, tall tube of hand-cut natural alabaster on a gold- or black-finished rod, glowing softly through the stone's own veining. Each shade is cut and polished from solid alabaster, so no two share the same grain or translucency. The narrow 3.9″ profile and an adjustable drop around 47″ suit a stairwell, entryway, kitchen island, bedside, or a row over a long dining table.
Solid hand-cut alabaster
Cut and polished from natural alabaster — each tube has its own veining and translucency.
Slim cylinder, ~47″ drop
A narrow 3.9″ column on an adjustable rod that lengthens for tall stairwells and foyers.
GU10 warm glow
Takes a standard GU10 bulb; AC 110–240V. Black or gold-tone hardware to match your room.
Stone shade
Natural white, honey amber, or grey-veined alabaster. Veining and tone vary by piece.
Hardware
Rod, canopy, and trim in black or gold-tone to suit your fixtures.
Custom drop & finish
Standard drop is roughly 47″ and adjusts shorter on-site; longer rods are made to order. For a specific stone tone, hardware finish, or a multi-drop layout, email us your ceiling height and spacing for a free layout.
Click the diagram to enlarge.
Click to enlarge ↗
🔍 3 Heads — Dia 30 × H 150 cm · ∅ 11.8″ × H 59.1″
🔍 5 Heads — Dia 35 × H 200 cm · ∅ 13.8″ × H 78.7″
🔍 7 Heads — Dia 45 × H 250 cm · ∅ 17.7″ × H 98.4″
🔍 9 Heads — Dia 50 × H 300 cm · ∅ 19.7″ × H 118.1″
🔍 11 Heads — Dia 50 × H 350 cm · ∅ 19.7″ × H 137.8″
🔍 15 Heads — Dia 55 × H 400 cm · ∅ 21.7″ × H 157.5″
| Material | Alabaster, Metal, Iron |
| Body finish | Black, gold-tone |
| Shade finish | Natural white; honey amber; grey-veined |
| Overall size | 3.9″ Dia × 47.2″ H (10 × 120 cm) |
| Alabaster shade | 3.9″ Dia × 15.8″ H (10 × 40 cm) |
| Rod length | 30+50cm |
| Light source | GU10 base — LED or halogen GU10 |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired ceiling mount · adjustable drop rod (extendable on request) |
| Moisture rating | IP20 — indoor, dry locations only |
| Certification | Listed · North America · CE · SAA · SASO |
- Hardwired ceiling install — a licensed electrician is recommended.
- GU10 base — use an LED or halogen GU10 bulb; 2700K warm-white best preserves the alabaster's natural tone.
- Drop rod adjusts shorter on-site and can be lengthened on request — give your ceiling height when ordering for stairwells or high foyers.
- Indoor, dry locations only (IP20) — keep away from showers, tubs, and other wet or damp areas.
- Natural alabaster: veining, tone, and translucency vary from piece to piece; minor surface variation is inherent to the stone, not a defect.
- The slim 3.9″ column suits tight spots — over a nightstand, console, kitchen island, or hung in a multi-drop row.
How much light does a single GU10 alabaster pendant give?
One GU10 bulb casts a soft, warm glow filtered through the stone — accent or mood light rather than a room's main source. Over a dining table, kitchen island, or stairwell, hang several in a row.
What alabaster colors and hardware finishes are available?
The stone shade comes in natural white, honey amber, or grey-veined alabaster; the rod and hardware in black or gold-tone. Because it's natural stone, veining and translucency vary from piece to piece.
Can the drop length be adjusted for a tall stairwell or foyer?
Yes. The rod adjusts shorter on-site and can be lengthened on request. Email us your ceiling height and we'll confirm the right drop before it ships.
Can this alabaster pendant be installed in a bathroom?
It's rated IP20, for indoor dry locations only. It can hang in a dry part of a bathroom away from water, but not over a tub or inside a shower or other wet/damp area.
What's the warranty, and is the bulb replaceable?
A 2-year warranty covers wiring and finish. The GU10 socket takes a standard replaceable bulb. Email support replies within one business day at hello@vakkerlight.com.