Carve Alabaster Pendant Light
Carve Alabaster Pendant Light
Carve Pendant Light
The Carve Pendant floats a full donut ring of natural Spanish alabaster — 100% imported from Spain — in the grip of a matte black three-arm frame that reaches up from below, each arm curving over the stone like a hand holding a wheel. The integrated warm 3000K LED lights the ring from within, so the honey veining glows against the black claw in a sharp play of stone and shadow, and a rigid black rod holds the whole composition dead level from the ceiling. Three ring diameters — Ø 60, 70, and 80 cm, each 53 cm tall overall including the rod — hang over dining tables, kitchen islands, and living rooms.
Spanish Alabaster Ring
A carved stone donut, 100% imported from Spain — glows edge to edge.
Black Claw Frame
Three matte black arms cradle the stone from below — bold contrast.
Rigid Rod Suspension
A 50 cm black rod holds the ring dead level — no sway, no tilt.
Natural Spanish Stone — Each Piece Is Unique
Every ring is carved from natural alabaster quarried in Spain. Veining and tone vary from piece to piece, so your pendant will differ from the photos shown — this variation is the character of genuine stone, not a defect.
Ø 60 × H 53 cm
Ø 23.6″ × H 20.9″ overall, incl. rod
Ø 70 × H 53 cm
Ø 27.6″ × H 20.9″ overall, incl. rod
Ø 80 × H 53 cm
Ø 31.5″ × H 20.9″ overall, incl. rod
🔍 Dimensions — tap to enlarge
| Sizes | Ø 60, 70, or 80 cm × H 53 cm overall (incl. rod) |
| Material | Natural Spanish alabaster (100% imported from Spain), metal |
| Light source | Integrated LED — replaceable; if the LED is ever damaged, contact us for a replacement module |
| Color temperature | Warm light 3000K — a Triac-dimmable warm-light version is available as a custom order |
| Voltage | AC 110–240V |
| Mounting | Ceiling, hardwired — rigid rod suspension, hangs level |
| Hanging rod | 50 cm / 19.7″ — length can be changed as required (contact us) |
| Finish | Matte black frame and rod, white alabaster ring |
| Control | Compatible with common wall switches (not included) |
| Environment | Indoor use |
- Hardwired ceiling installation — a licensed electrician is recommended.
- The ring carries real stone weight: anchor the canopy to a junction box or ceiling structure rated for the fixture — never drywall alone.
- The rigid 50 cm rod holds the ring perfectly level; a different rod length can be arranged before shipping — contact us with your ceiling height.
- Integrated LED — no bulb installation needed. If the LED module is ever damaged, contact us for a replacement.
- Handle the alabaster ring with two people and avoid impact — natural stone can chip.
- For indoor use only. Not suitable for bathrooms or damp locations.
Where does the alabaster come from?
The ring is carved from natural alabaster that is 100% imported from Spain — the same Spanish stone prized in fine lighting for its warm tone and translucency. It is genuine quarried stone, not resin or faux-alabaster glass.
Which size should I choose?
Over a table, the ring should be roughly half to two-thirds of the table's width: the Ø 60 suits round tables for 4 and breakfast areas; the Ø 70 carries tables for 4–6 and kitchen islands; the Ø 80 works over dining tables for 6 and in living rooms.
Is the Carve dimmable?
The standard version is a warm 3000K light that works with a common on/off wall switch and is not dimmable. If you'd like dimming, a Triac-dimmable warm-light version is available as a custom order — contact us and we will reply within 24 hours.
Can I replace the LED?
Yes — the LED module is replaceable. Nothing needs changing in normal use, since quality LEDs of this type are rated for tens of thousands of hours; and if the LED is ever damaged, contact us and we will arrange a replacement module — we reply within 24 hours.
Can I get a shorter or longer rod?
Yes — the standard rod is 50 cm (19.7″), and a different length can be arranged before shipping. Contact us with your ceiling height and we will confirm within 24 hours.
Can I use it in a bathroom?
No — this fixture is designed for dry indoor locations only and should not be installed in bathrooms, above sinks, or in covered outdoor areas where it could be exposed to moisture.
Why does my pendant look different from the product photos?
The ring is natural Spanish stone, so veining and tone vary from piece to piece. No two Carve pendants are exactly alike — this is the character of real alabaster, not a defect.
Is the Carve certified for North America and Europe?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.