Calla Lily Candle Holder
Calla Lily Candle Holder
A calla lily candle holder hand-forged from black wrought iron, with a mottled green flower cup that holds one standard 7/8″ (2.2 cm) taper candle. It comes in two versions: a wall-mounted piece that hooks over a single screw, and a tabletop version on a coiled base — so the same flowing stem can light an entryway wall or a dining table. The form reads as a single drawn line of iron, part sculpture and part candlestick holder.
Open-flame use — read before lighting
This holds a real burning candle. Never leave a lit candle unattended, keep the flame clear of curtains and walls, and set the tabletop version on a heat-safe surface. Not for electric, LED, or wax-warmer use.
Hand-forged iron
Each stem is bent by hand from solid wrought iron and finished matte black, so the curve varies slightly piece to piece.
Fits 7/8″ tapers
The green flower cup seats one standard 7/8″ (2.2 cm) taper candle. Candles sold separately.
Wall or table
Wall version hangs from a top hook; the tabletop version stands on a weighted coil.
Default configuration
Two versions share this design: a wall-mounted piece (LLB-F0147) and a tabletop piece on a coiled base (LLB-F0146). Ships as Wall-Mounted unless Tabletop is selected. Candles are not included.
Matte black frame, green flower cup
Standard finish is a matte-black hand-forged frame with a hand-applied green-patina flower cup. For a custom frame or cup color on a larger order, email support@vakkerlight.com.
| Version | Dimensions (W × D × H) | Candle fit | SKU |
|---|---|---|---|
| Wall-Mounted | 7.9 × 4.3 × 29.5″ (200 × 110 × 750 mm) | 7/8″ taper | LLB-F0147 |
| Tabletop | 11.8 × 7.5 × 16.5″ (300 × 190 × 420 mm) | 7/8″ taper | LLB-F0146 |
Wall-mounted · 🔍 tap to enlarge
Tabletop · 🔍 tap to enlarge
| Material | Hand-forged wrought iron frame; metal flower cup |
| Finish | Matte black frame; hand-applied green-patina cup (tone varies by piece) |
| Candle type | One 7/8″ (2.2 cm) standard taper candle — not included |
| Dimensions & SKUs | See the Available Configurations table above |
| Mounting | Wall: top hook over one screw/anchor · Tabletop: free-standing coil base |
| Care | Wipe with a dry cloth; remove wax drips when cool |
- Wall version: hook the top loop over one screw or light-duty anchor — ideal beside a mantel or in an entryway — and level the stem so the cup sits upright.
- Keep the flame at least 12″ from walls and curtains; set the tabletop coil on a flat, heat-safe surface.
- Use a 7/8″ (2.2 cm) taper that seats fully in the cup, and trim the wick before lighting.
- The green patina is hand-applied — small variations in tone and mottling are characteristic, not defects.
What size candle fits this calla lily candle holder?
One standard 7/8″ (2.2 cm) taper candle seats in the green flower cup. Thinner tapers can wobble; wider pillars will not fit. Candles are sold separately.
What is the difference between the wall-mounted and tabletop versions?
The wall-mounted version (LLB-F0147) is 29.5″ tall and hangs from a top hook. The tabletop version (LLB-F0146) is 16.5″ tall on a coiled base. Both take the same 7/8″ taper.
Can I get a different frame or cup color?
Standard is a matte-black frame with a green-patina cup. Custom colors are possible on larger orders — email support@vakkerlight.com with your quantity.
How do I hang the wall-mounted candle holder?
Drive one screw or light-duty wall anchor, hook the top loop over it, and level the stem. It takes a few minutes. Keep the cup and flame well clear of the wall.
How do I clean it, and what if it arrives damaged?
Wipe with a dry cloth and lift wax once cool; the hand-applied patina varies by piece and is not a defect. If it arrives damaged in transit, email support@vakkerlight.com with photos.