Calice Cone Wall Sconce
Calice Cone Wall Sconce
A minimalist cone wall sconce milled from aluminum, with a brushed, anodized finish and an integrated COB LED hidden inside. The open cone throws a soft wash up the wall — quiet, indirect light for a living room, hallway, entryway, or sitting room. It comes in two sizes and three finishes: black, silver-grey, and red-orange.
Brushed anodized aluminum
A clean cone in brushed, anodized aluminum — the metal body also sinks heat from the LED.
Integrated COB LED
A built-in COB module (about 10W) gives bright, even light — with no bulb to replace.
Soft uplight wash
The open cone aims a soft beam up the wall for quiet, indirect light, not glare.
Two sizes
Small — Ø3.9″ × 5.1″. Large — Ø4.9″ × 5.7″.
Three finishes
Black, silver-grey, or red-orange brushed anodized.
What you receive
One cone sconce in your chosen size and finish, hardwired with a slim wall mount.
Finish & size pairings
Pictured: black and silver-grey in the small cone, red-orange in the large. For a specific finish-and-size pairing, email us to confirm stock.
| Size | Cone Ø | Height | Projection |
|---|---|---|---|
| Small | 3.9″ (100 mm) | 5.1″ (130 mm) | 6.6″ (168 mm) |
| Large | 4.9″ (125 mm) | 5.7″ (144 mm) | 7.1″ (180 mm) |
Click any diagram to enlarge the dimensions for each size.
🔍 Click any thumbnail to open full size in a new tab
| Material | Aluminum |
| Body finish | Black, silver-grey, or red-orange |
| Shade finish | Matches body color |
| Light source | Integrated COB LED, about 10W (no replaceable bulb) |
| Voltage | AC 110–240V |
| Mounting | Hardwired wall mount · projects 6.6–7.1″ from the wall |
| Use | Indoor, dry locations only |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired wall install over a standard junction box — a licensed electrician is recommended; this is not a plug-in fixture.
- The cone projects 6.6–7.1″ from the wall, so allow clearance in narrow hallways.
- The COB LED is integrated — there's no bulb to change, and the aluminum body sinks heat to run cool.
- Wipe the brushed finish with a soft, dry cloth; avoid abrasive cleaners. Indoor, dry locations only.
How bright is the cone wall sconce?
The integrated COB LED draws about 10W and gives a soft accent wash rather than full task light. For a brighter hallway, space several down the wall or pair them with overhead lighting.
Can I change the bulb?
No — the COB LED is built in and rated for long life, so there's no bulb to swap. If it ever fails within warranty, contact us about service rather than replacing a bulb.
Which size and finish should I choose?
The small (3.9″) suits tighter walls and hallways; the large (4.9″) makes a bigger statement. Black and silver-grey read minimalist, while red-orange adds a pop — email us to confirm a finish-and-size pairing.
How is it installed — does it plug in?
It hardwires over a standard wall junction box on a slim mount and projects 6.6–7.1″ from the wall; it's not a plug-in fixture. We recommend a licensed electrician for the connection.
What's the warranty, and how do I clean it?
It carries a 2-year limited warranty. Wipe the brushed finish with a soft, dry cloth and avoid abrasives. Email hello@vakkerlight.com and support replies within one business day.